LOW COST All IN ONE AMOLED DISPLAY

☆ Digital TV Analyzer : DVB-C/C2/T/T2/S/S2, (QPSK, 8PSK, QAM, COFDM)

☆ Video decoder: MPEG1/2/4/H.264, H265,VC1,DV,  SD/HD to 1080p

☆ Handheld TS Analyzer

☆ Spectrum Analyzer.

AD454 is an optical fiber splicing device with a brand new design. With powerful functions and super low splicing loss, it is highly competent for construction of trunk lines and FTTx. Lightweight and compact, it is easy to use even in confined space. The novel fiber imaging system makes the image clearer. The real-time embeded Operating System provides a friendly man-machine interface and abundant functions. The built-in large capacity Li-Ion battery can support long-time field work. The real-time compensation system for temperature, and air pressure has greatly enhanced the device against unfavorable environment changes.

Main Features:
    ο New fully-digitalized design;
    ο Small in size, lightweight: only 1,5 kg with battery;
    ο Takes only 10 seconds for splicing, 36 seconds for pyrocondensation;
    ο Can set automatic start of splicing or of pyrocondensation upon close of the cover;
    ο Simultaneous display of X/Y axis; zoom in up to 320 times original size;
    ο Real time discharging for adjustment; no need for further adjustment;
    ο Electrode has a long life; discharging times up to 5000;
    ο With USB port;
    ο 4,3 inch digital high resolution LCD;
    ο Precise real-time display of remaining battery capacity;
    ο Built-in high capacity battery, which enables up to 250 times of splicing and heating.

Information about Product

Designed for Ethernet systems, AD500 measures the speed and performance on CAT3, CAT5e and CAT6 cables according to ANSI/TIA/EIA-568-B and ISO/IEC 11801 to ensure the cable qualification

  • High Bandwidth 200MHz Oscilloscope,1GS/s sample rate, and 6000 Counts DMM with analog bargraph.
  • 1M Memory Depth.
  • High Refresh Rate (2500 frames)
  • Large 5.6 inch TFT Color LCD Display，High Resolution(640*480), Dual-Window Design --More clear, More Detailed
  • One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
  • Easy-to-use pop-up menu with built-in multi-language help system
  • 23 Automatic Measurements
  • Waveform Math: Add, Subtract, Multiply, and Divide
  • Store and recall over
  • Automatic cursor tracking measurements
  • XY Mode
  • Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
  • Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
  • Pass-Fail function compares a stored waveform to an unknown input
  • Average Mode for smoothing waveforms
  • Square Wave Output (2V, 1kHz) for probe adjustment
  • USB Host/Device 2.0 full-speed interface ,support removeable disk ,Easy to control by PC or long-distance.

Información sobre el Producto

Información sobre AD Instruments

Fuente de alimentación  0-30V,  0-3A.

Sets REBT-1  CAT. Specialist: formed by:

• AD6830: Analyzer of networks and harmonic, it includes 1000A clamps, connection USB and software for PC.
•  AD4120: Ground Meter
•  AD9985: Isolate Meter analogical / digital 1000V/10 Gohm.
•  AD2811: Digital loop impedance meter
•  AD4112: Digital RCD meter.
•  AD1010: Luxómeter
•  LVD-17: Tension detector with ajsute of sensibility.
•  AD3348: Clamp wattmeter AC/DC TRUE RMS
• AD9809: High resolution 1 uA AC leakage clamp meter

Equipment Set for installers type F formed for:

• ADPON-T:   Analyzer of networks FTTx, screen color, datalogger, connection USB connectors SC/APC, ST/APC, and FC/APC included.
• AD2T01:  Source triple laser 1310/1490/1550 nm in one the only exit,ajustable output power from -2 dBm to -8dBm, SC/APC, ST/APC and FC/APC included.
• AD503D:  Kit of cleanliness and conectorización (it includes precision cutting machine and number of series).

   

• Power Quality Analysis for Single and Balanced Three Phase System
• Harmonic Analysis of Voltage and Current (1 to 50th order)
• True RMS measurement of V with 0.5% basic accuracy
• True RMS measurement of A with 1% of range basic accuracy
• Graphic Waveform of Voltage and Current
• Graphic Phasor Diagram
• Transient Detection and Logging of Swell, Dip, and Outage
• Fast peak function (39?s for 50 Hz, 33?s for 60Hz)
• Active (W, KW, HP), reactive (VAR, KVAR) and apparent (VA, KVA) power
• Power factor (PF), phase angle (?), and energy (WH, KWH)
• Measurement of balanced 3? Power Quality
• Programmable VT ratio from 1 to 3000
• Hold functions
• Auto power off function in 15 minutes

• From 2 MHz to 4 GHz
• Option 21 2-Port Transmission Measurement
•  Option 25 Interference Analyzer  
•  Option 27 Channel Scanner
•  Option 28 C/W Signal Generator
•  Option 31 GPS Receiver
•  Option 44 W-CDMA/HSPA+ RF Measurements
•  Option 52 E1 Analyzer
•  Option 62 EV-DO RF Measurements
•  Option 63 EV-DO Demodulation
•  Option 65 W-CDMA/HSPA+ Demodulation
•  Option 66 Mobile WiMAX RF Measurements
•  Option 67 Mobile WiMAX Demodulation
•  Option 90 Gated Sweep

Catalogo del Producto

Included

•  22N50 : Open/Short
•  SM/PL: Precision Load
•  Option: ICN50: InstaCal Calibration Module, 2 MHz to 6.0 GHz, N(m), 50 Ω

Product

•  Cable and antenna analyzer from 25 MHz to 4 GHz
•  Two ports
•  Option: Power meter

Product

AD456 is an optical fiber splicing device with a brand new design. With powerful functions and super low splicing loss, it is highly competent for construction of trunk lines and FTTx. Lightweight and compact, it is easy to use even in confined space. The novel fiber imaging system makes the image clearer. The real-time embeded Operating System provides a friendly man-machine interface and abundant functions. The built-in large capacity Li-Ion battery can support long-time field work. The real-time compensation system for temperature, and air pressure has greatly enhanced the device against unfavorable environment changes.

Main Features:
    ο New fully-digitalized design;
    ο Small in size, lightweight: only 1,9 kg with battery;
    ο Takes only 7 seconds for splicing, 18 seconds for pyrocondensation;
    ο Can set automatic start of splicing or of pyrocondensation upon close of the cover;
    ο Simultaneous display of X/Y axis; zoom in up to 320 times original size;
    ο Real time discharging for adjustment; no need for further adjustment;
    ο Electrode has a long life; discharging times up to 4000;
    ο With USB port;
    ο 4,3 inch digital high resolution LCD;
    ο Precise real-time display of remaining battery capacity;
    ο Built-in high capacity battery, which enables up to 220 times of splicing and heating.

Information about Product

Included

• Analizador de cable y antenas de 2 MHZ a 4GHz.
• Incluido 1 calibrador y 1 cable de medida
•  Opcional: ICN50: InstaCal Calibration Module, 2 MHz to 6.0 GHz, N(m), 50 Ω

Product