| Number of turning axis |
1- axis |
| Hour angle |
100°, software and hardware limit |
| Elevation angle |
75° adjustable start |
| Tracking accuracy |
<0.5° (optionally <0.1° ****) |
| Operating protocol |
TdAPS (Time derived Astronomical Positioning System) |
| Type of positioner |
Servo driver positioner with TdAPS arc logic function calculation |
| Type of timer |
GMT clock with EOT and calendar |
| Type of communication interface |
USB interface |
| Networking solution for control from centre |
CAN BUS **** |
| Type of application program for supervision and setting |
Solar tracking system monitor via web site |
| Motor power supply |
24 VDC ± 10% (2,5A current capacity) |
| Turning time interval |
1 minute (0.25°) |
| Operating temperature |
-25°C to +70°C |
| Max. safe wind speed |
<130km/h (tested up to 180km/h and all ok) |
| Estimated service life |
5.000 rotations of 200° (100°E + 100°W), or 10 years |
| Operation at humidity |
0% to 100%, relative humidity |
| Backup battery |
Backup for timer, position and data |
| Setting and changing data via PC |
Yes, It can be setup 1000 parameters |
| Monitoring possibility via PC |
Yes, It can be monitored 1000 parameters |
| Moved on the position sent from PC |
Yes, it turn on position sent from PC, also all other setting can be commanded with string sent from PC |
| Upgrading possibility via PC |
Yes, firmware via PC with help of web wizard |
| Options ( **** for additional payment ) |
**** |
| Anti-shadowing function |
/ |
| Type of hour-angle engine |
Linear motor SM4S520M1SP2A |
| Final stage of gear at hour-angle shaft |
/ |
| Hour-angle shaft diameter and length |
Ø48 mm, L=1450mm (steel) |
| Turning speed of hour angle shaft |
0.926 mm/s or 0,035 - 0,062 °/s at no load, see graph |
| Max. dynamic torque of the hour-angle shaft |
200-330Nm deppend from HA (Hour Angle), see graph |
| Max. consumption during the operation of the hour-angle shaft |
500mA @ 330 Nm, see graph |
| Destructive torque of the hour-angle output shaft |
750 -1250 Nm, depend from HA, see graph |
| Type of elevation shaft and stroke |
Linear motor SM4S520M1SP2A with stroke of 520mm |
| Turning speed of elevation shaft |
/ |
| Max. torque of elevation shaft |
/ |
| Max. current of elevation shaft |
/ |
| Destructive torque of elevation shaft |
/ |
| Standby consumption (when is not moving) |
20mA ±25% @ 24V |
| Power supply connection |
2 cables with an internal Cu conductor of 1.0mm2 |
| Arm width |
1000mm |
| Type of backstructure clamp |
Toothed scissors gripers - 12 pcs |
| Tube diameter for mounting |
Ø65mm |
| Dimensions of a PV panel |
2 pieces of 0,99 m x 1.95 m in total 4,0m2 |
| Weight of a PV panel |
2 pcs per 30 kg |
| Dimensions of a packed product |
1 box of 1600(L) x 245(W) x 202(H) mm |
| Product weight |
35 kg |
| Internal power battery for return at evening |
/ |
| Type of charging circuit if build in |
/ |
| Maximum charging current |
/ |
| Battery hysteresis of charging |
/ |
| Load hysteresis of discharging |
/ |
| Type of solar connectors (if needed) |
/ |
Ihr Warenkorb ist leer.
